FILTER CARTRIDGE AND FILTER ELMENTS The widest Range of pleated Filter Cartridge Elements for Dust Filtration OPTIMUM FUNCTION EVEN UNDER EXTREME CONDITIONS The range of products of Smart Blast Filter comprises pleated filter cartridges, filter panels and filter cassettes for the air and dust filtration technology, as well as accessories for assembling and cleaning of the filter elements like filter read more...

Internal Pipe Blast Nozzles 360° Internal pipe blasting nozzles type PTC-3600 are designed to blast clean the interior of pipes ranging in size from 2″ to 5″ LD. (50mm bis 125mm). The nozzle connected an abrasive blast machine in place of a standard nozzle. In operation, the PTC-3600 nozzle directs the air/abrasive mixture at a deflection tip. This tip causes read more...

Internal Pipe Blast Tool Pbt-I – For pipes 3″ (75mm) – 12″ (300mm) ID – Adjustable centering carriage for consistent blast pattern – Use with standard blast machine The PBT-I pipe cleaning tool is an ideal companion to clean blast pipes from 2″ (50mm) to 12″ (300mm) inner diameter. The PBT-I consists Of a tungsten-carbide nozzle in a venturi form read more...

Internal Pipe Blast Tool Pbt-2 Rotoblast – For pipes 12″ (304,8 mm) to 36″ (914,4 mm) ID – Variable feed and optimal rotation speed offers flexibility in cleaning rates for varying surface conditions – Adjustable centering carriage for consistent blast pattern – Use with standard blast machine The PBT-2 ROTOBLAST is an accessory for all Contracor blast machines that allows read more...

The Educt-O-Matic is the compact hand-portable closed-circuit blast tool, which can be transported everywhere and required just 2.5m3/min of air at 6bar. Blasting and media recovery are controlled just with one trigger. Media recovery is initiated by slightly pulling the trigger, while pulling the trigger fully starts the suction blast system. Abrasive is stored in a compact conical hopper from read more...

The VAC-5 abrasive recovery system is an electrically powered vacuum suction unit with an integrated high-performance cartridge filter comprising pulse-jet cleaning, an abrasive storage silo (mounted directly on the Contracor Z-200 series blast machine) for automatically refilling the blast machine and a floor hopper, complete with suction hoses and a grating. Application The VAC-5 abrasive recovery system is specially designed read more...

The BRS Blast Recovery System is an electrically operated, pressure-feed closed-circuit blast machine, which can be used where open-air blasting is prohibited, or is not possible or practical. Blasting and simultaneous media recovery are initiated by pulling the DMH handle. Keeping the blast area clean allows the operator to blast without the need to encapsulate the area or wear respiratory read more...

Portable Moisture Extraction Systems Mex Moisture extraction systems MEX remove condensate and oil from the air stream during abrasive blast cleaning. Condensate and oils in the abrasive blast cleaning system lead to the caking of abrasive material and potential blocking of the metering valves, hoses and nozzles. Dry and cleaned compressed air prevents caking of abrasive material, increases performance and read more...

Attach blast hose safety cables at all coupled connections. Before connecting the couplings, pull back the spring-loaded loop, slip it over the blast hoses only (not the remote control lines). Connect the hose coupling and slide the ends of the safety cable back until the cable is straight and the hose is slightly bent. read more...

Centrifugal Separators CS Centrifugal separators type CS are a most effective solution to remove up to 99% of the liquid condensate present in the compressed air network. CS separators type allow extremely reliable centrifuge operation and do not require any maintenance. Application Installation downstream of aftercoolers, air receivers, refrigeration dryers etc… Designed to remove up to 99% of liquid condensate read more...